Are you planning a wedding?
Make a tissue pack cover for each of your bridesmaids and the mothers,
using scraps of fabric from the dresses or wedding decor – you know somebody
will need tissues!
Step-by-step:
1. Cut two pieces of fabric 6 inches x 7 inches. Cut two pieces of narrow elastic 3
inches. Along one of the short sides, on
one piece of fabric, secure the elastic (folded to form a loop) inset 2 inches
from each end. Use painters tape to old
the elastic loop in place.
2. Place the two pieced of fabric face to face and sew along
the short sides using a ¼-inch seam allowance.
Backstitch over the elastic pieces, to make sure they are sewn
securely. Turn right sides out and press
with an iron.
3. Topstitch along each sewn edge, inset ¼-inch from the
edges. Fold the sewn edges together, meeting
in the middle and pin each end to hold in place.
4. Sew across the end using a ¼-inch seam allowance.
5. Flatten out each end and mark 1/2inch from each corner
and pin to hold in place.
6. Sew each corner, keeping the seam allowance facing in the
same direction. This will create a box
shape.
7. Turn right sides out and sew a button opposite each loop
of elastic. Insert tissues and loop the
elastic around the buttons.
It is a very informative and useful post thanks it is good material to read this post increases my knowledge. Grommet Curtains
ReplyDelete